Regular price $19,500.00 Sale



Semiconductor Equipment Corporation's Model 850 is a versatile, semi-automatic placement system for flip chips, chip scale devices and bare die. The system is intended for low volume production and development projects requiring accuracies of +/- 12 microns. A typical application consists of a cycle in which devices are picked up from a waffle pack, dipped into flux and then placed on a substrate. 

An optional heated stage (
S.E.C. Model 855) is available. An additional option, S.E.C.'s Model 430 Hot Gas Jet Module can be integrated to operate on the S.E.C. Model 850 as a spot heating source for airflow.

Description of S.E.C. Model 850

Color Video System 

A motorized zoom lens allows the operator to optimize viewing with its standard range of 10x to 100x. Other ranges are available. 

Fiber Optic Illuminators 

The system has two separate fiber optic ring light illuminators with separate controls for each, one illuminating the die and the other illuminating the substrate. 

Micrometer Adjusted Stage 

A micrometer stage is used to adjust X, Y, and Theta to move the substrate into exact alignment with the die. A 4 " square vacuum chuck is provided. 

Sliding Table with Brakes 

The system has a sliding table which has a 5 " x 13 " travel. Table movement is controlled by a joystick. Pneumatic brakes lock the table in position. 

S.E.C. Model 430 Hot Gas Spot Heater (optional) 

The S.E.C. Model 430 Hot Gas Jet Module uses heated gas to heat a single die to reflow. Its closed loop temperature control and gas flow control are integrated with the operation of the S.E.C. Model 850. This unit may be purchased as a field upgrade. 

S.E.C. Model 855 Heated Stage (optional) 

The heated stage is capable of 250º C operation. It incorporates a separate control box with its own closed loop temperature controls. This unit may be purchased as a field upgrade. 

Fluxing Station (optional)

The system includes a fluxing tray to dip the die into flux or adhesive prior to placement. The fluxing station can be added as a field upgrade. 

Illustrated Features:

A flux tray and doctor blade are used to apply a controlled and uniform thickness of flux.

Die are picked up from waffle packs.

S.E.C. Model 430 Hot Gas Jet Module deliver heated gas to the die in order to reflow a single die without affecting nearby components.


Features of S.E.C. Model 850

S.E.C. Model 850 Semi-automatic Flip Chip Placement System has the following standard features:

  • Manual X, Y sliding table with 13 " x 5 " of travel and ergonomic control arm.
  • Micrometer adjusted X,Y and Theta stage for fine alignment.
  • Pneumatic brakes for XY table movement.
  • 4" square flat vacuum chuck.
  • Cube beam splitter vision system with simultaneous view of die and substrate patterns for alignment.
  • Motorized zoom lens, color camera and TV monitor.
  • Four independent fiber optic ring light illuminators. Two for die and two for substrate illumination.
  • Viewer automatically retracts when Z motion is activated.
  • Automatic Z motion with pneumatic bond control panel adjusted.
  • Pick up tool.
  • Set up kit.
  • Manual.

Options for S.E.C. Model 850

  1. Die tray pedestal capable of holding four 2" square die trays.
  2. Fluxing Station included:
  • Pedestal with micrometer leveling.
  • Removable flux tray.
  • Hand held flux doctor blade.
  • Heated 4 " x 4 " workstage with control box, includes temperature controller, power switch and fuses. Temperature up to 225º C.
  • S.E.C. Model 430 Hot Gas Jet Module, including the following standard features:
    • Hot gas jet which directs up to 800º C heated gas through an interchangeable quartz to a specific area.
    • Voltage proportioning temperature controller for closed loop control of the hot gas temperature.
    • Adjustable gas flow with indicator.
    • Round or rectangular nozzles are available in a variety of sizes. One standard .060 I.D. nozzle comes with the system.
    • General purpose mounting bracket to facilitate mounting gas jet assembly to your equipment.
    • Footswitch controlled.
    • Three foot long interconnect cable between control module and gas jet assembly.
    • Safety interlocked to prevent heater burnout.
    • Manual.

    Specifications for S.E.C. Model 850

    • +/- 12 micron placement accuracy.
    • Four 2x2 waffle pack pick-up stage.
    • 4" square vacuum stage standard (optional sizes available).
    • Bond load - 30 to 200 grams standard (10kg optional).
    • Throughput - up to 200 placements per hour.



    Compressed air:

    60 psi


    20 " Hg


    110V, 3 amp - 60 Hz
    220V, 15 amp - 50 Hz


    39 " W x 30 " D x 24 " H


    System - 185 lbs; Shipping - 225 lbs.

    Financing available:


    Orange County Machinery.

    A Globe Enterprises Inc. Company.

    Visit our eBay store  Orange County Machinery



    General Information:

    Buying from Orange County Machinery is Simple, Practical and Efficient.

    Let us make your purchase headache free!

    We provide a complete buying solution from point A to Z. 

    We can be your one time stop shop for all your industrial needs!

    **Want to sell your equipment give us a call or send us an email**


    Step 1:

    Choose your favorite item

    Step 2:

    Bid on it, Make an offer, or Buy it now

    *Get Familiar with our terms and condition*

    Step 3:

    Pay for Item and arrange shipping

    Step 4:

    Put your equipment to work


    Item is being listed as USED, we have made our best effort to check and test this item, nonetheless is being being sold “AS IS”.  Any conditional notes will be listed in the additional information.

    Equipment Inspection

    We are open to the public, buyers are encouraged to inspect item prior to purchase.

    Buyer shall have the right to inspect the machinery and/ or tooling at our location in Southern California during normal business hours, prior to time of shipment.

    Email or call us to schedule an appointment. If preferred, a virtual inspection can be accommodated. We are available to FaceTime, Skype or Google Hangout to inspect item.

    Payment and Financing

    All payments must be made in full within seven days of the time of purchase.

    Accepted Forms of Payments:

    • Certified checks

    • Company Checks

    • Credit Card (VISA, MASTERCARD and DISCOVER)

    • Direct deposit

    • Paypal

    • Wire transfer


    Prices do not include any federal, state, or local taxes, which are in addition to the purchase price and must be paid by Buyer.  Any and all foreign duties and taxes are the responsibility of Buyer.  Unless Buyer furnishes Orange County Machinery with a tax exemption certificate.

    Shipping and Logistics:

    Orange County Machinery can provide you with a competitive shipping rate on

    • Less-Than-Truck (LTL) Freight

    • Full Truck Loads

    • Oversized Machinery

    • Containers and International Shipping

    Local Pickup is available.

    * All purchases will be loaded free of charge.*

    Our shipping rates are only valid if prepaid from our invoice. If you have your own carrier and wish to use them, we can ship out freight via the carrier of your choice as long as you provide your own paperwork.   

    ** Prior to signing any paperwork, ie a BOL, it is the buyer’s responsibility to inspect all freight for damages. In the event you determine anything is damaged, you have two options – 1.) Sign the BOL as DAMAGED and Deny the freight and it will be returned to Orange County Machinery for a refund minus freight costs, or 2.)Sign the BOL as damaged, and accept that the carrier is only liable for 10 cents per pound and that will be the MAX you will receive back. In either case, please take as many pictures of the damages as possible and make notes of the damages. Orange County Machinery is not liable for any damages caused by carriers. **


    If purchase is less than 85 lbs, item will be boxed and shipped UPS, USPS, or FedEx.  We will provide you with a total including shipping within 1 business day of purchase. Packing may include bubble wrap, packing paper, insta-foam packaging, or other forms of protection for securing the item.

    At Orange County Machinery’s discretion, items that are deemed bulky and/or heavier than 85 lbs, we will NOT ship UPS/USPS/FedEx.  We require freight shipping to reduce the chance of damages. If this impacts buyers purchase, we will cancel order at no penalty to them.

    Local pickup is available .

    Buyer's Responsibility And Indemnity:

    It shall be Buyer's responsibility to ensure that any machinery and/ or tooling purchased from Orange County machinery is installed and operated in a proper and safe manner.  The Buyer also acknowledges that it may have to install or change guards, safeties, warnings or other components to ensure that the machinery and/ or tooling purchased hereunder will conform to all laws, regulations, ordinances, codes, insurance requirements and industry standards including OCHA.  


    Buyer/Customer agrees to indemnify, hold harmless and defend seller from any and all claims, liabilities or lawsuits arising out of the use of, or in any way involving injury or accident limited to occasioned by said equipment. Said agreement includes, but is not

    limited to, the duty to indemnify, hold harmless, and defend seller in any of the following situations: claims involving or alleging  improper or negligent design, maintenance, construction, reconstruction, repair, alterations, or modification of the equipment by the seller, its agents, or employees; claims involving allegations or failure, negligent or otherwise, on the part of the federal, state, or local government statutes, rules or regulations, or as is customary in the trade; and claims involving or alleging negligence by the seller, either by alone or jointly with buyer or any other person, firm, or organization. Buyer/Customer/user specifically agrees to indemnify, hold harmless and defend seller from any and all claims alleging negligence on the part of the seller and waives benefit of any laws, rules, or regulations contrary to, or in limitation of, this future, or any of the covenants recited herein shall not affect the validity of the remaining covenants. Under no circumstances shall we or any affiliate of ours have any liability whatsoever for the loss of use of for any indirect or consequential damages. The buyer expressly agrees to indemnify, hold harmless and defend Orange County Machinery and employees, officers, directors, clients, associates, and agents from any and all claims, suits, losses, or expenses (including attorney’s fees) arising from the property sold.

    Return Policy:

    If for any reason you are not satisfied with your purchase, please return it within 30 days of the date of the order, freight must be prepaid by the buyer, for a refund with the exemption of shipping.

    We have a very low return rate. Please ask questions before purchasing any item.

    Buyer is responsible for all shipping costs; original shipping fees will NOT be refunded. Orange County Machinery sells all products “AS IS”,  Orange County Machinery  makes no warranty, express or implied, and Orange County Machinery  expressly disclaims any warranty of merchantability or fitness for any particular purpose.

    Orange County Machinery’s sole obligation pursuant to this order is to deliver the goods to the buyer. Orange County Machinery shall have no other obligation or liability, direct or indirect, of any kind, including liability for special, incidental or consequential damages. Prices are subject to change.

    **by bidding or buying you are agreeing on the terms and conditions**


    © 2015 ORANGE COUNTY MACHINERY, All rights reserved.